Skip navigation

Looking for the Best Price on a Thermaco Big Dipper Automatic Grease Trap Removal System ?

We carry all size Big Dipper Automatic Grease traps – W-200-IS, W-250-IS, W-350-IS, W-500-IS, W-750IS – AGRU – Interceptor

Call us & SAVE!! – we will not be undersold!

860-481-4491

To Help you Determine what size you will need click on link below..

Sizing your Grease Removal System  – Click Here

Features:

  • Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator assistance. Comes complete with 24-hour timer and Grease Collector.
  • Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
  • Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
  • Compact footprint.
  • Two (2) No-Hub Connectors provided.Thermaco Big Dipper W-500-IS, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator for floor mounted or partially recessed installation, rated at 50 gallons per minute peak flow, 100 pounds of grease capacity and including as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, a lift-out strainer basket access, an internal stainless steel strainer basket for collection of coarse solids, and a separate grease and oils collection container. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with thermal overload protection with automatically resettable switch. Two (2) no-hub connectors for plumbing connection provided.

    Specifications: Material Exterior: 304 Stainless Steel, Bright Finish
    Material Interior: Rotationally Molded Polyethylene
    Electrical: 115 VAC, 60 Hz, 520 Watts (4.5 Amps)
    Maximum Inlet Flow Rate: 50 GPM
    Number of Skimming Wheels: 1
    Skimming Rate: 20 Pounds Per Hour
    Grease Retention Capacity: 100+ Pounds
    Internal Solids Strainer Capacity: 2.5 Gallons

    Always the Lowest & Best Price – Call for your customized quotation on a Big Dipper Automatic Grease and Oils Removal System

    Need Another Model or Size ?

    W-200-IS – 40+ Lbs Capacity 20 GPM
    W-250-IS – 50+ Lbs Capacity 25 GPM
    W-350-IS – 70+ Lbs Capacity 35 GPM
    W-500-IS – 100+ Lbs Capacity 50 GPM
    TZ-160 – 160 Lbs Capacity 35 GPM

Bakers Pride FC-816 & Y-800 Deck Pizza Oven – Used Excellent condition
This is a pre-owned pizza oven in great shape it also has fine interior stones – ready to cook
For more info Call 860-481-4491

JUST IN!

Pic coming

The Bakers Pride FC-816 IL Forno Classico combines the ambiance of a traditional old world brick oven with the convenience and control of modern technology.  Customize your installation to create a unique dining atmosphere to leave a lasting impression with your customers and build your business.  Perfectly balanced cooking and baking results are assured with our user-friendly technology and consistent, accurate and easy-to-use controls. See Brochure – Click here

The II Forno Classico is available in three sizes to meet your space and production requirements and may be stacked on our standard deck ovens for increased production in limited Spaces- FC-516 on our D-125 or DS-805, FC- 616 on our Y-600, And FC-816 on our Y-800. The FC-616 and FC-816 now feature A new 32” extra-wide opening for ease of access to the Bake/cooking chamber. The stainless II Forno is designed To be used as is and need not be bricked in. 38” (956mm) Legs with casters provided. 120v or 240v electrical connection All Gas types available.

Models: FC-516, FC-616, FC-816, FC-516SS, FC-616SS,

See The Spec Sheet for our oven here FC-816

Click here for Spec Sheet for Y800 – Bottom oven
If you would like more information on this or other used pizza ovens please call us
860-481-4491
The Y Series are the greatest selling Deck Ovens in the world.  Designed for high volume, quality pizza baking, they feature ceramic hearth decks, unique micro slide top and bottom heat controls, 120,000 BTUH per deck and may be stacked two high or as a lower deck to our IL Forno Classico.  Stainless steel exteriors are standard.

Discount Pizza Ovens and Restaurant Equipment

Just in – Here is a set of 2 Blodgett 1048 Deck Pizza Ovens, very nice in good working condition, aka double stack Blodgett ovens. Currently Setup for Natural Gas but can be converted to Propane
Blodgett Deck ovens are reliable and most popular in New England
Call for more info on this double stack Blodgett 1048 Deck Pizza Ovens with stones
For More Info Call – 860-481-4491

Pics coming soon –

See Spec Sheet – Click here

Discount Pizza Ovens and Restaurant Equipment

Contact us for more info – 860-481-4491

Looking for the Best Price on a Thermaco Big Dipper Automatic Grease Trap Interceptor ?
Here we have the Big Dipper W-500-IS
Be sure to call us & SAVE!!
860-481-4491
To Help you Determine what size you will need click on link below..
Sizing your Grease Removal System  – Click Here
( Other Sizes and Models also available in W-200-IS, W-250-IS, W-350-IS, TZ-160, TZ-400 )
Attention – CT Customers – Be sure to get you order in early before the July 1st 2011 Deadline
( To Avoid Backorders with the massive influx of CT Purchasers )

Call us Today & SAVE – 860-481-4491

Call us Today & SAVE – 860-481-4491
Features:

Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator assistance. Comes complete with 24-hour timer and Grease Collector.
Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
Compact footprint.
Two (2) No-Hub Connectors provided.Thermaco Big Dipper W-500-IS, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator for floor mounted or partially recessed installation, rated at 50 gallons per minute peak flow, 100 pounds of grease capacity and including as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, a lift-out strainer basket access, an internal stainless steel strainer basket for collection of coarse solids, and a separate grease and oils collection container. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with thermal overload protection with automatically resettable switch. Two (2) no-hub connectors for plumbing connection provided.

Sizing your Grease Removal System – Click Here

Mfg Specifications Sheet
Product Information Sheet
Installation & Operation Manual
Applications for use
Specifications: Material Exterior: 304 Stainless Steel, Bright Finish
Material Interior: Rotationally Molded Polyethylene
Electrical: 115 VAC, 60 Hz, 520 Watts (4.5 Amps)
Maximum Inlet Flow Rate: 50 GPM
Number of Skimming Wheels: 1
Skimming Rate: 20 Pounds Per Hour
Grease Retention Capacity: 100+ Pounds
Internal Solids Strainer Capacity: 2.5 Gallons
Dont Wait to get your – Big Dipper W-500-IS Point Source Automatic Grease Removal System
Need Another Model or Size ?
W-200-IS – 40+ Lbs Capacity 20 GPM
W-250-IS – 50+ Lbs Capacity 25 GPM
W-350-IS – 70+ Lbs Capacity 35 GPM
W-500-IS – 100+ Lbs Capacity 50 GPM
TZ-160 – 160 Lbs Capacity 35 GPM
Mfg Website W-500-IS
Link
Best Price

Discount Pizza Ovens and Restaurant Equipment

Looking for the Best Price on a Thermaco Big Dipper Automatic Grease Trap Interceptor ?
Here we have the Big Dipper W-200-IS
Be sure to call us for Best Price & SAVE!!

860-481-4491
To Help you Determine what size you will need click on link below..
Sizing your Grease Removal System  – Click Here
( Other Sizes and Models also available in W-250-IS, W-350-IS, W-500-IS, TZ-160, TZ-400 )
Attention – CT Customers – Be sure to get you order in early before the Deadline

Call us Today for Lowest & Best Price & SAVE!! – 860-481-4491


Call us Today & SAVE – 860-481-4491

Features:

Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator assistance. Comes complete with 24-hour timer and Grease Collector.
Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
Compact footprint.
Two (2) No-Hub Connectors provided.Thermaco Big Dipper W-200-IS, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator for floor mounted or partially recessed installation, rated at 20 gallons per minute peak flow, 40 pounds of grease capacity and including as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, a lift-out strainer basket access, an internal stainless steel strainer basket for collection of coarse solids, and a separate grease and oils collection container. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with thermal overload protection with automatically resettable switch. Two (2) no-hub connectors for plumbing connection provided.

Sizing your Grease Removal System  – Click Here
Mfg Specifications Sheet
Product Information Sheet
Installation & Operation Manual
Applications for use

Specifications – Material Exterior: 304 Stainless Steel, Bright Finish
Material Interior: Rotationally Molded Polyethylene
Electrical: 115 VAC, 60 Hz, 520 Watts (4.5 Amps)
Maximum Inlet Flow Rate: 20 GPM
Number of Skimming Wheels: 1
Skimming Rate: 20 Pounds Per Hour
Grease Retention Capacity: 40+ Pounds
Internal Solids Strainer Capacity: 1.85 Gallons

Big Dipper Grease Traps – Grease Recovery Device

Need Another Model or Size ?

W-200-IS – 40+ Lbs Capacity 20 GPM
W-250-IS – 50+ Lbs Capacity 25 GPM
W-350-IS – 70+ Lbs Capacity 35 GPM
W-500-IS – 100+ Lbs Capacity 50 GPM
TZ-160 – 160 Lbs Capacity 35 GPMMfg Website for Big Dipper W-200-IS Specs

Discount Pizza Ovens and Restaurant Equipment

Connecticut Restaurant and Food Estalbishment Owners- Automatic Grease Trap Installation Law Deadline July 1, 2011

The State Of Connecticut Department of Environmental Protection has new law that requires  Class III or Class IV establishments must be in compliance by July 1, 2011, however four conditions exist that may force earlier compliance. see also General Permit for the Discharge of Wastewater Associated with Food Preparation Establishments which can be viewed by General Permit for discharge of Wastewater associated with Food Preparation or by Visiting CT.Gov website.


The four conditions that exist that may force earlier compliance are

1. Renovations,

2. Change in ownership

3. Areas of existing sewer problems

4. Within local municipalities which have implemented the program already.

The new law will require all CT Restaurants & Food Establishments

1. Installation of Minimum 1000 gallon outdoor passive grease interceptor.

2. Installation an Automatic Grease Recovery Unit.

3.  This law also requires that records of all inspections, cleaning and maintenance be recorded and kept on site for a period of 5 years.

A Grease recovery device, aka Automatic Grease Trap Interceptor, shall be installed on those fixtures or drains which would allow F.O.G. – Fats, Oils, & Grease to be discharged, this shall include any of the following

  • Pot Sinks, Compartment Sinks
  • Pre-Rinse Sinks, Prep Sinks
  • Any sink into which fats, oils, or grease are likely to be introduced;
  • Soup Kettles, Tilting Skillets, or similar devices;
  • Wok Stations;
  • Floor Drains or Sinks into which Kettles or Skillets may be drained;
  • Automatic Hood Wash Units:
  • Any other equipment / fixtures or drains that are likely to allow fats, oils and grease to be discharged.

Be sure to View CT Waste Water Discharge / General Permits


We at Foodequipmentsource.com – are here to assist you in obtaining your Lowest & Best Price on Grease Recovery Device / Automatic Grease Trap, we also understand the costs in this essential upgrade in becoming compliant with this NEW Connecticut State Law.


We have an entire line of Thermaco Big Dipper Grease Traps & Trapzilla AGRU – as well as alternative choices in Grease Recovery Devices  in order to SAVE YOU MONEY! on your Required Purchase – Be sure to Visit us Online to Purchase or Call us to discuss your needs and Place your Order by Phone – 860-481-4491

We also offer Equipment Leasing which you can apply for right on our website where you can Buy Now & Pay Monthly – so Visit us on our Official Website Today & SAVE!! – Foodequipmentsource.com


Link to Blog

big-dipper, thermaco,  w-200-is, w-350-is,  w-500-is, w-250-is,  AGRU, IGRD,  F.O.G., Best price, lowest price, trapzilla, highland tank, automatic grease trap, auto grease trap, grease interceptor, CT, connecticut,  law, wastewater, DEP, water and sewer department, TZ-160, TZ-400, TZ-600, CT Department of Environmental Protection, law

big-dipper, thermaco,  w-200-is, w-350-is,  w-500-is, w-250-is,  AGRU, Best price, lowest price, trapzilla, TZ-160, TZ-400, TZ-600, automatic grease trap, grease interceptor, CT, connecticut, law, dep

Are you looking for the Best price on a Thermaco Big Dipper automatic grease trap?

We offer the lowest price available for any model Big Dipper Automatic Grease trap interceptor

Our available models are W-150-IS, W-200-IS, W-250-IS, W-350-IS, the W-500-IS, & Trapzilla TZ-400.

Please contact us for pricing and availability on any of the above grease recovery devices..

Call Today – 860-481-4491 or visit our main web sitewww.Foodequipmentsource.com


It is our goal to provide our customers with the lowest and best pricing new and used grease traps.

We also have teamed up with some leasing companies to assist you with an affordable solution and financing for existing and startup restaurants.

Be sure to call us & SAVE –  860-481-4491

In order to assist you in sizing your automatic grease trap – please visit the Sizing Link.  – or contact your local water or sewer department, health department or
governing branch.

What Model or Size Big Dipper Grease Trap Do You Need..?

W-200-IS – 40 Lbs Capacity 20 GPM
W-250-IS – 40 Lbs Capacity 20 GPM
W-350-IS – 40 Lbs Capacity 20 GPM
W-500-IS – 40 Lbs Capacity 20 GPM
TZ-160 – 160 Lbs Capacity 35 GPM

Thermaco Grease Trap Interceptors – Grease Removal Devices

Link

Best Price on Big Dipper Automatic Grease Traps

Just in Marsal Brick Lined Pizza Ovens Model MB 60 Double Set

More details including pics coming soon

Call for Immediate Assistance 860-481-4491

www.Foodequipmentsource.com

Actual Picture Pending

marsal-mb-60

Automatic Grease Trap Interceptor Grease Recovery Device – New

Automatic Grease Recover units designed for Oil & Grease separation from town and city waste water drainage for Commercial Kitchens, Restaurants, Cafeterias, Deli’s, Schools, Grocery Stores & Fast Food establishments .

This Automatic Grease and Oils Removal System is a cost effective alternative to the Big Dipper models W-200IS, w-250-IS

Please Call Us for more info, best price & low cost shipping quotation

860-481-4491


Specs /Capacity: Upto 50 Lbs / 25 GPM Flow

Constructed of 3/16” thick polyethylene corrosion resistant material and unit is completely seamlessly molded to be water tight.

Unit also comes with a removable perforated internal strainer baffle basket to capture coarse solids and provides for easy maintenance.

Small Footprint 21″W x 26″L x 16.5 H.

UL Listed.

Tested to meet PDI, ASME and IAPMO standards.

Electric requirements—120v/ 20 Amps.

The control box is 18 gauge type 304 stainless steel.
Unit is built to NSF Standard #2 with seal of approval.

For above floor use only.

NOTE- Please specify if inlet is on left or right
when order is placed.

Commercial Grease Trap – Grease Recovery Device – Automatic – Electronic

Call & Order Today – 860-481-4491

www.Foodequipmentsource.com

Looking for the Lowest & Best Price on a Thermaco Big Dipper Automatic Grease Trap System ?
We carry all sizes W-200-IS, W-250-IS, W-350-IS, W-500-IS, W-750-IS & Trapzilla
New & Used available

Be sure to call us & SAVE!!

WE WILL NOT BE UNDERSOLD – BEAT ANY ADVERTISED PRICES

BEST PRICE ONLINE!

860-481-4491

thermaco-big-dipper-grease-trap

To Help you Determine what size you will need click on link below..

Sizing your Grease Removal System  – Click Here

(Attention – CT, RI, MA Customers – Be sure to get up to code for Fats, Oils and Grease (FOG) Programs before the Deadline to avoid Fines & Penalties from – Massachusetts Water & Sewer Department,
State of Connecticut Water Pollution Control Authority & the RI Narragansett Bay Commission)
Call us Today & SAVE – 860-481-4491
W-200-IS cutaway drawing

Always the Lowest & Best Price – Call for your customized quotation on a Big Dipper Automatic Grease and Oils Removal System

Call us Today & SAVE – 860-481-4491

Need Another Model or Size ?

W-200-IS – 40+ Lbs Capacity 20 GPM
W-250-IS – 50+ Lbs Capacity 25 GPM
W-350-IS – 70+ Lbs Capacity 35 GPM
W-500-IS – 100+ Lbs Capacity 50 GPM
TZ-160 – 160 Lbs Capacity 35 GPM

Visit our main site – Foodequipmentsource.com